Tuning instrument clusters and shield inserts for Chevy-Niva and Niva 213-14

Tired of the boring Niva tidy and cable speedometer. It was decided to start by installing a panel from a Chevy Niva and then replacing it with a dashboard produced by Ferrum GF 825 Chevrolet Niva with an on-board computer. We are not afraid of difficulties and the work is in full swing: To begin with, the standard instrument panel was dismantled and the rewiring began. Standard contacts in the white block (X1): 1 Empty 2 High beam indicator lamp 3 K gab. lighting (indicator lamp) 4 To terminal “15” of the ignition switch 5 To the hazard warning switch 6 To output “D” of the generator 7 Empty 8 PTF indicator lamp 9 Heated glass indicator lamp 10 Check Engine 11 To fuel level sensor 12 Check Engine 13 To sensor coolant temperature indicator

Standard contacts in the red block (X2): 1 Empty 2 To terminal “15” of the ignition switch 3 Low-voltage tachometer input 4 To the instrument lighting control 5 High-voltage tachometer input 6 Housing (ground) 7 To terminal “50” of the ignition switch (starter) 8 K parking brake switch 9 Empty 10 To fuel reserve lamp 11 To differential lock sensor 12 To oil pressure sensor 13 To brake fluid level sensor

What should happen:

White block (X1) 1 Housing (ground) 2 Tachometer (low-voltage input from the ECU) 3 Tachometer (high-voltage input from the coil) 4 Const +12V from the battery (through the 6th fuse) 5 Coolant temperature sensor. 6 Fuse F1 (side lighting) 7 Throttle valve (“choke”) 8 Check Engine lamp 9 Fuse F19 + 12V power supply 10 Fuse F19 + 12V power supply 11 Parking brake, terminal “BK” 12 Terminal “D” of the generator 13 Oil pressure sensor

Red block (X2) 1 * External air temperature sensor 2 Fuse F19 + 12V power supply 3 Housing (ground) 4 Instrument lighting switch 5 Turn signal RIGHT 6 Turn signal LEFT 7 Brake fluid level 8 To trip computer 9 Speed ​​sensor 10 Terminal “T” fuel gauge 11 Fuse F3 (high beam) 12 Differential lock (-) 13 To terminal “50” of the ignition switch

We re-stretch the missing wires and cut off the excess wires and insulate them. The external temperature sensor was purchased at the store 2115-3828210-03. The photo shows the result of the work, good luck to everyone who loves their cars and puts their soul and effort into them!

The Chevrolet Niva SUV has been very popular among domestic car enthusiasts for many years. The versatility of the vehicle and high cross-country ability are what are most valued among the owners of the “baby”. The car is suitable for daily trips, for going hunting or fishing, and can also serve as a “workhorse”. The Chevrolet Niva is a versatile, but structurally not ideal car.

What fans of the compact SUV are most unhappy with is the interior, which looks a little unfinished. It is possible to correct this drawback and make the movement of passengers more comfortable by tuning the interior of the Chevrolet Niva. Doing all the work yourself, without resorting to the help of specialists, will not be difficult. The main thing is to arm yourself with the necessary tools and show a little imagination.

Tuning options

In any car, not only the appearance of the body is important, but also the interior.
Chevrolet Niva is no exception here. For some reason, the appearance of the dashboard of this car does not please the owners for long, and some often want to change something almost immediately after purchase and add style, so to speak. The most serious change inside the cabin is the tuning of the Chevrolet Niva dashboard. Before starting work, it is important to decide what exactly you want to do and think about the consequences.

The choice of options for tuning is not particularly large:

1. Install a device from another car. In this case, you will need the services of a qualified electrician, since the connectors will have to be redone. You can also install a digital version of the tidy - it will be more than original.
2. As a tuning option, you can install LED bulbs instead of regular ones. Many car owners choose this option because it is less expensive and the easiest to implement.
3. Another tuning method is to install original instrument scales on the speedometer, tachometer and other sensors. Moreover, you can buy such scales either ready-made or make them yourself in accordance with your preferences.

For those who want to bring something new to the interior of the cabin, there are special offers in the form of electronic panels such as Gamma GF 825, GF 826, GF 610 SL, FLASH-I, etc. They look great and are installed without problems.

If you decide to carry out such tuning of the instrument panel, the Chevrolet Niva will immediately be transformed for the better. You just have to pay from 9 to 20 thousand rubles for this. But for this money you will additionally receive:

• multifunctional trip computer;
• digital and analogue vehicle speed indicators;
• LED warning lamps with two-level alarm;
• on-board network voltage indication;
• "Autolight" system;
• integrated diagnostic tester for electronic engine management system;
• ability to select and adjust the backlight (color, brightness).

Well, if you don’t have the opportunity to spend that kind of money, you can modernize the panel using special tuning kits. They include overlays for instruments and indicators (of different colors) and lighting elements. Such sets cost 500-800 rubles.

Options for self-tuning the Chevrolet Niva dashboard

In any car, not only the appearance of the body is important, but also the interior.
Chevrolet Niva is no exception here. For some reason, the appearance of the dashboard of this car does not please the owners for long, and some often want to change something almost immediately after purchase and add style, so to speak. The most serious change inside the cabin is the tuning of the Chevrolet Niva dashboard. Before starting work, it is important to decide what exactly you want to do and think about the consequences.

Description and location of indicators and instruments on the panel

The instrument cluster includes many elements.

In accordance with the diagram above, the shield structure is as follows:

1. The coolant temperature control sensor, the arrow on it rises as the engine warms up. The controller needle should not be allowed to move into the red zone, as this will indicate overheating of the power unit.
2. A tachometer is a device that measures the number of revolutions of the engine crankshaft.
3. The left turn signal activation symbol, made in the form of a green arrow, appears when the corresponding indicator on the steering column switch is turned on. If the light blinks faster than usual, this may indicate a burnt out bulb.
4. Right turn signal.
5. Speedometer, this device allows the driver to know how fast the vehicle is moving. The speedometer is connected to the transfer case via an electric drive.
6. Gasoline fuel level controller; the Chevy Niva uses an electromagnetic device that functions only when the ignition is activated. When the ignition is turned off, the controller needle moves down the scale.
7. The fuel reserve indicator in the gas tank appears on the dashboard when the fuel level in the system is about 4-6.5 liters.
8. The side light activation lamp appears on the dashboard when the corresponding optics are turned on.
9. The brake system emergency symbol appears if the brake fluid level in the expansion tank has dropped to a critical level.
10. High beam indicator.
11. A key that allows you to reset the daily mileage readings. You can also use this button to switch to the clock or outside temperature sensor.
12. A screen that displays the total and daily mileage of the vehicle.
13. The Check Engine indicator indicates the need for engine diagnostics. It should always appear when the ignition is turned on, and disappear after starting the engine. If this light remains on while driving, the engine management system needs to be checked.
14. Light alarm activation lamp.
15. Symbol of time and temperature; you can switch from one mode to another using button 11.
16. Battery low indicator, this light should always appear when the ignition is turned on and disappear after the engine is started. If the indicator is always on, this indicates that there is no charging current in the on-board network. This may be due to a failure of the voltage regulator or generator unit, or the lamp may light up if the tension of the generator strap is insufficient or breaks.
17. Handbrake activation symbol. If your Niva Chevy is on the handbrake, the indicator will light up when you turn on the ignition and start the engine.
18. Indicator of emergency low pressure of engine fluid. It should always appear when the ignition is activated. If it lights up after turning on the engine, this indicates low pressure in the system or a lack of engine fluid.
19. Reserve indicator (video author – Artem S).

And also interesting: Camshaft position sensor for Chevrolet Niva
The shield of the Niva-Chevrolet has a classic arrangement. It is shifted to the left and is located on top of the steering column. This position gives the driver the opportunity to observe the sensor readings without turning his head to the side while driving.

Disassembling the dashboard

If the shield malfunctions, it will have to be disassembled in any case to determine the cause of the breakdown. How to remove the instrument panel? “Niva-Chevrolet” will not cause problems in this sense.

This is done as follows:

1. Use a slotted screwdriver to pry up and remove two plugs. The first is located to the right of the hazard warning button, and the second is in the far right corner of the panel trim.
2. We turn out the screws located under the plugs.
3. We pull out the right side of the dashboard trim and remove the connectors from the control buttons. Remember (take a photo) which connectors go to which buttons!
4. We disengage the left side of the trim, remove the block from the buttons for turning on the headlights and dimensions. We remove and remove the lining.
5. Unscrew the two screws securing the dashboard. Disconnect the connectors.
6. We remove the panel.

First, disconnect the battery; this must be done, since the dashboard contains a lot of wiring that can be shortened during careless removal. To de-energize, remove the terminal from the minus and this will be enough. After which you can remove the console.

Changing the overlay on the Niva dashboard

If you don’t like the way the basic instrument panel on a Chevrolet Niva looks, you can tune it by replacing the standard background. For these purposes, you will need to buy a special overlay in the store with the dial values ​​already printed on it. They are usually presented in a wide range of car dealerships. All that remains is to choose a ready-made one to suit your taste and replace the standard one with it; this can be done while replacing the incandescent paws with LEDs.

Selecting a cover

When choosing an overlay, be sure to check it while still in the store by holding it up to a powerful light source or at least to an illuminated display case. Inspect the trim from all sides for defects.

Very often, at the intersection of color boundaries, the presence of marriage can be detected. When choosing a color, do not forget that white LEDs give a bluish tint, so it is better to think about the lighting in advance.

Design Features

What can the instrument panel tell us? The Chevrolet Niva is designed in such a way that its panel unites all the control devices of the car. It includes:

• speedometer;
• odometer (counter of kilometers traveled);
• tachometer (crankshaft revolution counter);
• coolant and ambient temperature indicators;
• fuel level indicator;
• 12 control (signal) lamps.

In order for the driver to monitor instrument readings at night, the panel is illuminated when the side lights are turned on. How bright is the instrument panel backlight? "Chevrolet Niva" has the function of adjusting the level of illumination of the dashboard. It is provided by six special light bulbs.

Important: the shield has an electronic design and cannot be repaired if it fails! Spare parts in the form of individual panel units are not available for sale. The only exceptions are signal and lighting lamps. In other words, if at least one indicator fails, you will have to buy an assembled panel.

The simplest light tuning

• After you have removed the dashboard, remove the dark-edged protective glass.
• Remove the arrows and turn the panel over, unscrew the screws that hold the entire structure using a Phillips screwdriver.
• The next step is to remove the scales, but since they are glued to the plexiglass, be careful not to break it.
• Peel off the light filter (located on the scales) and wipe off any remaining glue with nail polish remover or solvent.
• Then we put everything back in its place and check it.

Important! It is better to control the entire process through a fluorescent lamp, so all the shortcomings are visible.

The scale values ​​on the dashboard will be highlighted much brighter than before the upgrade. This option is quite simple and quick. Moreover, there is less chance of breaking something.

Dashboard plug addresses

A few words about warning lamps

Why are indicator lights needed on the instrument panel? With their help, Chevrolet Niva gives the driver signals that a failure has occurred in one of the systems. It looks like this:

• a lamp in the form of an oil can indicates that there is insufficient pressure in the engine lubrication system (may be due to damage to the crankcase, a malfunction of the oil pump or the sensor itself);
• the light with the image of the battery turns on when the battery stops receiving charging from the battery (the voltage regulator may fail or there may be an open circuit in the generator circuit);
• a lamp in the form of a circle with an exclamation mark inside lights up when the level of brake fluid in the expansion tank drops below normal (it is better not to continue driving until you find out the cause of the fluid leak);
• a light bulb in the form of a schematic engine - “CHECK” may indicate the failure of any sensor, malfunctions in the operation of systems and mechanisms (accurate diagnosis is carried out after reading and decoding the error code);
• a signal indicator in the form of a thermometer located on top of the scale of the coolant temperature meter lights up if it heats up above normal (failure of the radiator fan, temperature sensor, thermostat).
  Read also:  Flush hole between the gearbox and transfer case in NIVA-VAZ-2121-21213-21214-2131

According to the previous scheme, we disassemble the Niva’s dashboard and unscrew all the light bulbs, there are 18 of them in total, and they are all the same, and replace them with LEDs.

You can also replace the light bulbs in the stove, there are only 2 of them. To do this, remove all the knobs and remove the panel, change the light bulbs. Put everything back together and check for functionality. This another simple tuning will cost you about 400 rubles. and 40 minutes of work.

Also interesting: Why the Chevrolet Niva air conditioner does not turn on: reasons and installation (diagram), belt replacement

If you don’t like the way the basic instrument panel on a Chevrolet Niva looks, you can tune it by replacing the standard background. For these purposes, you will need to buy a special overlay in the store with the dial values ​​already printed on it. They are usually presented in a wide range of car dealerships. All that remains is to choose a ready-made one to suit your taste and replace the standard one with it; this can be done while replacing the incandescent paws with LEDs.

We continue tuning the interior: instrument panel, lighting, audio system

Upgrading the instrument panel is quite simple - replacing incandescent lamps with LEDs will give it a completely different look. It contains only 18 regular light bulbs; they need to be unscrewed and LEDs installed in their place. You can also replace two light bulbs in the stove. At any auto store you can purchase an LED strip to replace the standard interior lighting. It is characterized by a very bright light that can illuminate a significant part of the interior.

True, the tape also has some disadvantages - weakness to mechanical damage. In any case, this type of tuning is very popular and produces a truly impressive effect. What else can be included in interior tuning? It will not be difficult to independently install chrome or wooden linings on the gearbox handle or door handles. With their help it is easy to give the car interior a special charm and elegance.

When completing the improvement of the Chevrolet Niva interior, of course, it is worth taking care of the quality of the audio system. Nothing brightens up a long trip like your favorite musical compositions. It is enough to purchase a new radio, preferably one that includes a navigation system. The acoustics will be improved by a subwoofer and modern speakers, which today are not only part of the audio system, but one of the components of the car’s interior.

Niva Chevrolet is a new modification of the VAZ 2121 all-terrain vehicle, which was produced in Soviet times. The new model received a streamlined body, modern technical options, such as power steering, electrically adjustable exterior mirrors, headlight range control and air conditioning. Despite this, the car remained Spartan in terms of configuration. This preservation of the concept laid down in the first modifications of the VAZ 2121 made it possible to attract the attention of consumers due to ease of maintenance and a relatively high degree of cross-country ability. In other words, Niva Chevrolet is perfectly adapted for domestic light off-road conditions, which prevail in most areas.

"Niva-Chevrolet": instrument panel, designations

Now let's look at the “screen” itself. What indicators does the instrument panel combine? Chevrolet Niva is not original in this regard. The largest indicators are the tachometer and speedometer. Their round scales are located in the center of the shield. The hands of these devices are driven by small, separate stepper motors.

Below the tachometer there is a liquid crystal screen, which displays information about the ambient temperature, as well as the time. At the bottom of the speedometer scale is the same display informing the driver about the total and daily mileage.

To the left of the tachometer is the coolant temperature gauge scale, to the right of the speedometer is the fuel level indicator in the tank. Both devices have a magnetic-electric design.

In the lower left corner there are warning lamps for the battery discharge indicator, parking brake engagement, emergency engine oil pressure, as well as another backup lamp. The lower right corner is occupied by indicators for turning on the headlights, high beam headlights and a low brake fluid level indicator.

At the top, between the tachometer and speedometer scales, there are arrows for activating the turn signals (right and left). At the bottom center of the dashboard there is an indicator for turning on the hazard warning lights, and below it is a “CHECK” indicator lamp.

Tuning the dashboard of the Niva Chevrolet

If you are tired of your dashboard on your Chevrolet Niva and you can no longer look at it, then tuning will come to your aid, which you can do with your own hands quickly and inexpensively.

The dashboard is one of the important parts of the interior of any car, and any driver is sure to look at it during a trip. Its appearance is before your eyes, and after some time of owning the car, many drivers get tired of this appearance. But don't despair! There are many ways to change the appearance of the Shnivy instrument panel and tune it.

Installation

Attach the purchased trim to the dashboard and trace all the components and symbols so that when you cut off the excess, the trim will lie flat. Then remove the old one and glue a new one in its place. This is probably the most difficult thing in the whole procedure.

Also, many people like to change the color of the instrument hands, most often to white, as it advantageously reflects the LED backlight of the dial. This is done using women's nail polish. The old paint is cleaned off with a utility knife and the hands are degreased with nail polish remover or acetone. Then they are coated with white varnish.

After the varnish has dried, they can be put in place. Glue the overlay onto the panel, place the arrows and assemble everything in reverse order. Enjoy the updated version of the instrument panel.

Possible faults

The instrument panel, like any other electronic component, is susceptible to harmful factors such as a short circuit, broken wires in the power or information circuit, or a malfunction of one of the main components of the device. If you have encountered a similar problem, first of all, determine what signs of failure the shield is showing:

• the panel does not function at all, but the engine starts and runs normally;
• The Niva-Chevrolet instrument panel does not light up, but all indicators work (no backlight);
• The speedometer and tachometer do not work;
• Temperature and fuel level sensors are not functioning.

In the first case, contact on the device connectors is most likely lost. It is enough to disconnect the pads, clean the contacts, and everything will work again. A similar malfunction can overtake you in the fall or winter, when the level of moisture in the air is high.

If on a Niva-Chevrolet car the instrument panel lamps do not light up, but all its elements are operating normally, the reason must be sought in the power wires of the lighting bulbs, or in the lamps themselves.

Failure of the tachometer or speedometer also indicates a break in the power circuit. The same can be said if there are problems with the fuel level and temperature sensors.

If you understand the symbols of the light bulbs in the Niva Chevrolet instrument panel, let's look at the next point - possible malfunctions of the device:

1. The instrument cluster does not work, but the engine starts normally. Most likely, the problem is caused by either a failure of the shield itself or a lack of power.
2. The lights on the instrument cluster do not light up. If all the indicators stop working at once, this may indicate a break or fraying of the wire responsible for the lighting. If only some of the lamps do not work, then most likely they are simply burnt out.
3. Devices do not work - speedometer or tachometer. Most likely this is an electrical type problem; you need to disassemble the panel and look for the fault.
4. Sensors do not work - fuel level, antifreeze temperature. As practice shows, this usually indicates poor contact in the electrical circuit. Usually this problem is solved by disconnecting and cleaning the plug contacts (the author of the video is the Ig K channel).

And also interesting: Chevy Niva roof racks in Balashikha, buy inexpensively in the online store with delivery | 40NOG

Chevrolet Niva engine tuning

There are a huge number of options for modifying the Niva Chevrolet engine, which will significantly increase its technical characteristics:

• Replacing the crankshaft and piston rings gives an increase in volume of 0.1 liters
• Replacing injectors
• Replacing the control unit
• Correction of engine geometry by increasing the diameter of the valves and the pushrod well for the intake and exhaust ports. New pushers with a diameter of at least 1 mm are required
• Sealing valves increases power by 10%
• Replacing the catalyst with a flame arrester. This is a tuning of the Chevrolet Niva exhaust system, but it helps improve the technical performance of the engine

All these operations require direct intervention in the technical device of the car. The optimal way to chip tune a Chevrolet Niva engine is to work with the brains of the engine – the injector. Software knowledge is required here. With its help, the technical parameters of the machine are changed. This method is the least expensive.

Video of chip tuning of a Chevrolet Niva with your own hands.

Chip tuning of a Chevrolet Niva involves the use of a special connector for connecting to a car and a laptop. Software is very important here. It is desirable that it be licensed. But this option is quite expensive. You can download good builds on the Internet, but you should first read reviews about them. Reflashing and chipping an engine takes up to 1 hour on average. At the same time, torque and power increase by an average of 10%, the ride becomes smoother, and the engine runs quietly and smoothly. At the same time, fuel consumption remains at the same level or decreases to an average of 1 liter per 100 km.

Chip tuning is carried out only when the car is fully operational. Otherwise, serious technical problems may occur. For example, fuel consumption will become uncontrollable.

Torpedo tuning Chevrolet Niva

To tune the torpedo, you must first remove it. Don't forget to turn off the power beforehand. After which you can either cover the torpedo with leatherette, or paint it with a spray can or spray gun in any color you like. If you decide to cover the dashboard with fabric or leatherette, to do this you need to take measurements from the dashboard and make patterns from them so that it is convenient to cut the material and not confuse anything with the dimensions.

Then you need to sew the components together and start reupholstering. To do this, use hot glue and a regular hairdryer. The glue needs to be applied to the dashboard and, after waiting a little, apply the material, smoothing it and heating it with a hairdryer. This is done to prevent air bubbles from forming underneath.

When the work is completed, the torpedo can be installed in place, but keep in mind that some parts will become thicker and you may have to file down the plastic or trim the fabric here and there.

Of course, the easiest option for tuning a dashboard or dashboard is to buy a new one, but it is much more interesting to make the upgrade yourself and catch the admiring glances of passengers.

Chevrolet Niva suspension tuning

Niva Chevrolet was created for driving on rough terrain, so the car’s suspension is able to withstand serious loads, but not all and not always. Therefore, to improve cross-country ability, it is necessary to strengthen the suspension.

The most popular and relatively simple is lifting a Chevrolet Niva with your own hands, that is, increasing the ground clearance. For this purpose, special kits are sold, the installation of which will require the use of plumbing and pneumatic tools, as well as the presence of a lift. Suspension tuning itself consists of the following stages:

• Reinforcement of the suspension with shock absorbers, they are installed in parallel with the standard ones. You must first prepare fastenings for them
• Improvement in terms of reliability of standard fastenings of support units
• Installation of shock absorbers or gas-oil shock absorbers
• Replacing standard springs with reinforced modifications
• Installation of non-adjustable steering knuckles
• Replacing standard hubs with rotary ones
• Particular attention must be paid to the jet thrusts; they must be strengthened.

Replacing the instrument cluster on a Chevrolet Niva

What can you tell by looking at the described instrument panel? Chevrolet Niva, despite the participation of foreign designers in the development of the car, remained close to its relatives. This is a typical VAZ shield, not much different from those installed on the new Samaras. And, to be honest, reviews about it do not evoke positive emotions.

Display – TFT LCD with RGB backlight. 3.2″ (240x320) Displays up to 5 parameters simultaneously. Updated design. Reset ECU errors. Working with parking sensors. Software Update.

Display - LCD graphic 128×64 Installation - in a standard place. Black background white symbols. Autolight. Working with the partner. Reset ECU errors.

For VAZ 2110, Lada Samara, Chevy Niva. Display - graphic with RGB (128x64) Installation - in place of the standard EPC. Reset ECU errors. Autolight. Tropic.

Display – LCD graphic 128×64 Black background white characters. Autolight. Installation is a regular place. Software Update. Working with parking sensors. Reset ECU errors.

Display - LCD graphic 128×64 Installation - in a standard place. Black background white numbers. Software Update. Working with the partner. Reset ECU errors.

For Lada Samara, VAZ 2110, Chevy Niva. Display - PLED graphic (128x64). Installation - in the standard location of the EPC. Reset ECU errors.

Display: TFT with RGB backlight. Installation - in place of the standard EPC. Autolight. Tropic. Watch. Encoder. Reset ECU errors.

For Lada Samara, VAZ 2110, Chevy Niva. Display - PLED graphic (128x64). Installation - in the standard location of the EPC. Reset ECU errors. Autolight.

Display - LCD graphic 128×64 Installation - in a standard place. Black background white symbols. Working with EPG. Working with the partner. Reset ECU errors.

Display - LCD graphic 128×64 Installation - in a standard place. Black background white numbers. Working with the partner. Reset ECU errors.

If you are planning to change the instrument cluster on a Chevrolet Niva, you have a choice - whether to buy a new factory combination, produced from 2022, the old model panel until 2022. or "tuning". It hardly makes sense to install an old panel with a “ten” design on a car - it’s too outdated, and it’s not easy to find it on sale.

Chevrolet Niva interior tuning

Tuning the interior of a Chevrolet Niva with your own hands is traditionally reupholstering it. Genuine leather on the seats or a high-quality substitute will be especially chic. Chrome or imitation mahogany inserts may appear on the doors.

A good, relatively simple, but expensive option would be to replace the seats with sports ones. An integral attribute is a new steering wheel. If you need to save money, it is best to use a technique called flocking - applying cotton dust to the sheathing, which creates a fleecy effect. The new interior can be given any color.

You can also replace the standard seat belts, install xenon or bi-xenon interior and underbody lighting. Additional sound insulation will not hurt. Instead of a standard stereo system, a bot computer would look great - it’s also a functional solution.

What is a torpedo

In any car, comfort is created not only by comfortable seats and the presence of heating devices. A very important element of comfort in cars is the dashboard – the dashboard. Its appearance affects the mood of not only the driver, but also the passengers. On a Chevrolet Niva SUV, the standard dashboard can be improved with the help of new decorative elements and components. The main detail in changing or tuning a car's dashboard is the desire of the car owner.

All cars have a dashboard (board), which is located in front of the passenger compartment. In a Niva Chevrolet car, it is a plastic covering on which almost all vehicle control elements are located. Although the panel is not a necessary part for driving a car, without it driving turns into complete dissatisfaction.

Read news about the new Niva

• Ignition relay Niva Chevrolet where is it located
• Review of the standard alarm system Niva Chevrolet
• Niva Chevrolet installation of air conditioning - Auto magazine MyDucato
• Niva Chevrolet alarm connection points
• Installation and repair of Niva Chevrolet cooling system fans
• Chevrolet Niva pinouts. Wire diagrams || Niva Chevrolet power window button diagram
• How to change the light bulbs on the instrument panel of a Niva Chevrolet: video
• Relays and fuses Lada 4×4 (VAZ 21214, 21314) » Lada.Online || Niva 21213 low beam power button

Tuning the trunk of a Chevrolet Niva

The easiest way to do tuning of a Chevrolet Niva trunk with your own hands is to install LED elements on the lid. They can also be attached around the perimeter of the rear door arch.

For those who love music, the trunk of the Niva Chevrolet opens up enormous opportunities for experimentation. You can install powerful speaker systems with a subwoofer there, although you will have to sacrifice capacity.

A completely exotic solution would be to install a small billiard table that will extend and unfold automatically. The Niva Chevrolet trunk volume of 320 liters opens up wide opportunities for modernization.

Below you can watch a video on how to make an organizer for the trunk of a Chevrolet Niva with your own hands.